DDM Guild Repaint December 2009: Goblin Cutter

Megan Smith, a valued community artist and Chapter Master in Brisbane, Australia, brings us the tenth in her series of monthly DDM Guild Repaints. Up this month: the Goblin Cutter from Monster Manual: Legendary Evils.

Explanation and General Instructions

Megan Smith writes:

I really liked getting monthly repainted minis from Organised Play (when we actually managed to get them in Australia) and would like to keep that going for the DDM Guild. However, as we don’t have WotC’s vast resources, or Chinese factory labour, the repaints will be done by each Chapter that wants them. I’d suggest that the Chapter Master ask for volunteers – painting skill is not a requirement, and it should only take about an hour of your time to do 6-10 minis.

It will always be a common mini; the person doing the painting is welcome to use their own spares or to collect a mini from everyone who wants a repaint. You will need to paint enough for everyone in the group to have one, and if you can do a couple of extras to hand out to other people as advertising for the guild (or to give to the shop you play at) that would be great.

Each mini will use 1 or 2 paints (only one of which will be new). I’ll be using (and testing my instructions with) Games Workshop’s Citadel paints because they are very available in most places. If you don’t want to spend the $3.50 or so a month, I would hope that the recipients of the minis would be happy to take turns supplying the paint.

If you already own suitable paints, it’s not a requirement to use exactly what I suggest, but I’d recommend it, as I will have checked that one coat gives the coverage we need and that the wash (if we are using one) goes over it smoothly.

You’ll need a brush—a size 0 round will work for all guild repaints—but if you’d like to be able to do washes faster, get something bigger, like a 2 or 3. Natural hair is generally better than synthetics, but anything that’s relatively soft will work fine.

For the painters out there (and also the non-painters, I suppose), we are aiming for WotC factory quality in the paint jobs, so they are all the same and are fast to do. So, just do the steps outlined (ie. Resist the temptation to paint the eye, or do a quick highlight on the cloak, etc).

I’ll put a thread up in Crafter’s Corner on Hordelings each month, so that if anyone has questions, or needs assistance, s/he can get it. If you don’t have a DDM Guild Chapter near you, feel free to make a repaint for yourself … and while you are at it, make a few extras to give to your FLGS (glue them to Guild flyers).

This Month’s Repaint: Legendary Evils – Goblin Cutter

Paint needed: Mechrite Red foundation paint, Baal Red Wash, Mithril Silver, Chaos Black, Skull White (from Citadel/Games Workshop)

Normal Painting supplies: paintbrush, water for rinsing the brush, paper towel.

This is a special Christmas repaint .. and is a little more work than normal, but I hope you’ll think the end result is worth it. It might look a little daunting, but if you’ve done previous repaints, you’ll be able to do this too.

Steps

1. Clean your minis

Wash your hands first, then scrub each mini with a toothbrush, using warm water and dishwashing liquid. Then, scrub again with just the warm water to make sure there’s no oil, soap, or anything weird on the surface of the mini. Throw them onto a paper towel a couple of times to knock off most of the water, and then leave them to dry.

2. Paint the Armour Red

• Shake the bottle of Mechrite Red paint, then open it carefully.
  
• Dip your brush in your rinsing water and brush it gently on the paper towel to remove the excess water.
  
• Dip the tip of your brush into the paint. It’s often easier to work from the pool of paint in the lid. You need to cover the brown armour, (feel free to paint over the belt buckle as well), the most important thing is to avoid getting any red on the skin. You don’t need to paint the boots, as they will be done in black later, and the bits on the back of the hand can be left too (as they will be white).
  
• If your paint is too thick and gluey, it might be easier to put some out on a palette and mix in some water to thin it a little.
  
• Once they are all painted, leave them to dry (10-15 minutes, depending on the weather).

3. Wash with Baal Red

• Shake the bottle of wash, then open it carefully.
  
• Dip your brush in the rinsing water and brush it gently on the paper towel to remove excess water.
  
• Dip your brush into the wash and apply it liberally over the red paint. It should flow off reasonably easily and fall off the high points, into the creases, bringing out all the details.
  
• Keep getting wash and putting it on the mini until it is reasonably covered. If it pools anywhere it shouldn’t, use the brush to move it to other spots.
  
• After you’ve done each mini, it’s a good idea to rinse out your brush.
  
• Leave the minis for 20-60 minutes to dry (exact time will depend on the weather).

4. Paint the white details

• Shake the bottle of Skull White paint, then open it carefully.
  
• Dip your brush in the rinsing water and brush it gently on the paper towel to remove excess water.
  
• Dip the tip of your brush into the paint. It’s often easier to work from the pool of paint in the lid. Paint the cuffs of the sleeves (including the armour triangle on the back of the hands), and around the collar, and a stripe from the V of the neck to the belt buckle. Use the shapes in the sculpt, and the pictures to guide you.

5. Paint the black details

• Shake the bottle of Chaos Black paint, then open it carefully.
  
• Dip your brush in the rinsing water and brush it gently on the paper towel to remove excess water.
  
• # Dip the tip of your brush into the paint. It’s often easier to work from the pool of paint in the lid. Paint the belt and the boots (you’ll notice a sculpted ridge just below the knees, paint it black, but don’t go above it) (see the pictures). If any paint has got onto the base round his feet, this is the time to paint it back to black.
  

6. Paint the belt buckle

• Shake the bottle of Mithril Silver paint, then open it carefully.
  
• Dip your brush in the rinsing water and brush it gently on the paper towel to remove excess water.
  
• # Dip the tip of your brush into the paint. It’s often easier to work from the pool of paint in the lid. Paint the rectangular edge of the buckle, and if you want too, paint the tongue in the centre (see the pictures)
  
  .

Use your Guild Logo Stamp on the bottoms of the bases, and then you are … finished! Please tell us about your Guild Repaints. Post a picture in Crafter’s Corner on Hordelings and tell us how many you’ve painted and given away. See you next month!